26
Input
HDMI
When the video input signal is connected to the HDMI terminal,
select HDMI.
The projector automatically detects the incoming video signal and
adjusts itself to optimize its performance.
If the output signal of video equipment and the input signal of the
projector do not match, you might not get an image with the best
quality.
If the black part of the picture appears unclear (too dark or too
light), try the input signal with “HDMI setup” in the Setting Menu
on page 36.
When the input signal is connected to the COMPUTER connector,
select Computer.
RGB (Analog)
When the input source is analog coming from a
computer connected to the COMPUTER
connector, select RGB (Analog).
RGB (Scart)
When the input terminal is Scart with a DVD
player connected to the COMPUTER connector,
select RGB (Scart).
Source Select Menu
Computer
Input
Computer
Press the Point
8
button
to display the Source
Select Menu.
Use the Point
ed
buttons
to select the desired
source and press the OK
or Point
8
buttons.
This projector automatically tunes to various types of computers
based on VGA, SVGA, XGA or SXGA with its Multi-scan system
and the Auto adj. function (p.32). If Computer is selected as a
signal source, this projector automatically detects the signal
format and tunes to project a proper image without any additional
setting. (The signal formats provided in this projector is shown on
page 52.)
Quit
Exit this menu.
