Programme type
The frequency of the present station will be displayed.
The display will show the digital audio bit rate being received
Manual
This describes that you can select your favorite station manually.
DRC
The display will show HIGH, LOW and OFF for quality of tone.
PRUNE
This describes the preset station will be PRUNE or not.
SYSTEM
This describes the software version and RESET.
This describes the style of the programme that is being broadcast.
The Ensemble/Multiplex is a collection of radio stations that are bundled and transmitted together in a single
frequency. There are national and local multiplexes, local ones contain stations that are specific to that area.
The time and date will be automatically updated by the broadcasted information; there is no need to set the clock
manually.
area.
Ensemble/Multiplex (Group name)
Time and date
Frequency
Audio bit rate
When you move the radio to another part of the country, your pre-tuned and stored DAB stations may no longer
be available. If this is the case then you will need to reset your radio back to its original factory settings; to
perform a factory reset, please do the following:
1. Plug the radio to mains and press the STANDBY/ON button once to turn the radio on.
2. Press the MENU/INFO button for longer than 2 seconds, then press the or button to select SYSTEM mode.
3. Press the SELECT button once to confirm, and then press the press the or button to select RESET.
4. Press the SELECT button once to confirm, and then press the press the or button to select Y.
5. Press the SELECT button again to confirm, the display will show “RESTART”
6. The unit will then automatically enter into the DAB mode and perform auto scan function. After the scan has
finished, the radio will select and display the first alphanumerically found station.
Note: All of your stored DAB & FM presets will be lost once the reset has taken place.
POWER SUPPLY : AC ~ 240V 50Hz
DC 6V 4 xUM-3/AA
OUTPUT POWER : 0.5 W
FREQUENCY RANGE : DAB+ 174.9 - 239.2 MHz
FM 87.50 - 108.00 MHz
UNIT DIMENSION : 150 (W) x 40 (D) x 100 (H) mm
WEIGHT: 0.425kg
***SPECIFICATION SUBJECT TO CHANGE WITHOUT FURTHER NOTICE.
FACTORY RESET
SPECIFICATION
LISTEN TO THE MUSIC BY USING HEADPHONE
Plug your headphones (3.5mm mini-stereo plug) into the headphones jack on the right side of the unit. The
sound will be heard through the headphones, not the speaker.
The operation of the unit or display is not normal.
The unit must be reset.
1. Disconnect the main lead and replug again.
2. Resume operations.
The main unit does not work properly. The
batteries in the main unit are weak, or installed
incorrectly.
Check the battery polarity (+ or -). Replace the battery.
TROUBLE SHOOTING
SYMPTOM
POSSIBLE CAUSE CORRECTIVE ACTION
No power
No mains lead plug connection at the AC
outlet.
Insert the plug into the AC outlet.
No sound.
Volume control is set to minium.
Turn up the volume.
The wrong function is selected.
Select the correct function.
5
