3
Accessories:
1 set hose accessory
1 piece floor brush
1 set metal telescope tube
1 combination nozzle
1 Power
cord
2
Cord rewinding pedal
3 Handle
4
ON/OFF switch pedal
5 Speed
control
6
Front cover clip
7 Hose
socket
8 Dust
cup
9
Dust cup handle
10 Wheels
Introduction of Parts
4
1. Connect the hose accessories; insert the hose end into the hose socket
at the front cover and then hook it.
Figure_1
Make sure the front cover is firmly locked before hose setting.
2. Connect the metal tube to the
curved end of the hose.
Figure_2
3. Connect the different tools to the tube for different cleaning purposes;
Floor brush (adjusted to the type of ground) for carpet or floor.
Combination nozzle for sofa, wall surface, curtain, corner or space
between furniture etc.
Figure_3
4. Before starting operation, pull out the power cord and then insert the
plug into the power socket which conforms to that on the rating label for
power supply.
5. Turn on the machine. Press the on/off switch pedal, the machine could
start working.
Figure_5
6. The machine would start working without speed control. To control
suction power, slide the speed control on the body. Suction power can
also be controlled by sliding the airflow control on the hose.
Figure_4
7. Combination nozzle; Use the crevice nozzle on vacuum edges and
gaps. The head of the combination nozzle can rotate. Use the round
brush to vacuum sofa, curtain or fragile or easily scratched items.
8. Turn off the machine: press the on/off switch pedal again, the machine
is turned off. Pull the plug out of the power socket.
Figure_6
9. Cord
rewinding;
Before rewinding, be sure to the cord is unplugged.
To rewind the power cord, press the cord rewinding pedal, the power
cord will be drawn in.
Figure_7
10. Moving the machine. Carrying it by using the carry handle.
11. Remove the hose accessories; press the adaptors at both side of the
hose end and then pull the hose accessories.
Figure_8
Use Instructions
