Trouble Shooting
If you have a problem with you cleaner, consult the handy guide below. If the
cleaner is malfunctioning, do not operate it before asking for service.
Noisy operation
Low Suction
Clean the filter and empty the dust cup.
Clean or replace the filter.
Remove the blockage.
Put the dust cup in place.
Over-heating/
Automatically
Stopping
Clean the filters, and empty the dust cup. Check for
blockages and unblock and allow it to cool.
Plug unit firmly.
Cannot Find the
Combination
Nozzle
Nozzle is clipped into a compartment at the bottom
edge on the back of the vacuum cleaner (between
the wheels).
It is a single attachment.
Floor Brush hard
to push
Due to the strong suction power, it may be difficult
to push, especially thick carpet. Rather than force to
use the floor brush, lift up the Floor Brush
momentarily to allow air to flow into the vacuum
releasing to the built up suction pressure , then do
well to push floor brush.
Slide and open the suction adjusting plate located
on the hose handle grip. This will reduce suction
power of the floor head.
Cord doesn’t fully
rewind
Pull out the cord and rewind again.
6
Made in China
