DAY/TIME SEARCH
Day/Time Search
1
Press the PAUSE/SEARCH button three times during
stop mode.
°
“T/D SEARCH 01 00:00” will be displayed on
screen.
1H22M33S
T/D@SEARCH
01@@00:00
DAY@TIME
2
Press the
l
(or
j
) button to set the desired day, then
press the
*
button.
3
Press the
l
(or
j
) button to set the desired hour,
then press the
*
button.
4
Press the
l
(or
j
) button to set the desired minutes.
NOTES:
•
The setting can be made in 10 minutes increments
only.
•
For recordings made on other VCRs, the exact time
may not be found even if the minutes are entered.
For tapes recorded on older models of VCRs
produced by this company (the ones without a
minutes setting for the day/time search function),
make sure to set the minutes to “00”.
5
Press the FF (or REW) button.
°
The desired day/time is searched and a still
image of the recording will appear on-screen.
6
Press the PLAY button.
°
Playback will start.
NOTES:
•
If during a search the end of the tape is reached, the
tape will rewind and stop. If the beginning of the tape is
reached, it will stop.
•
The alarm and day/time data are recorded on the tape
in a similar format. If they overlap, the alarm data will
have the priority. Therefore, when searching for a
day/time when an alarm recording was done, the
day/time search will not stop at the desired location. In
such a case, use alarm scan to find the desired
recording location.
•
The day/time search function may not operate correctly
if searching for a timer recording time or if the clock on
the recording VCR has been adjusted using the
CLOCK ADJUSTMENT function.
•
If a recording on a tape extends for over a one month
period, the same day may be present twice on the tape.
If such a day is searched, since there is no month
search setting, the desired day may not be found.
SETTING THE SECURITY LOCK
The security lock function is designed to prevent
accidental stopping of recording if the STOP button is
pressed inadvertently.
1
While holding the TRACKING/V.STILL + button,
press the REC/PLAY SPEED CHANGE button.
°
“
x
”
is displayed on the digital display.
To cancel the security lock, while holding the
TRACKING/V.STILL + button, press the REC/PLAY
SPEED CHANGE button, “
x
” will be erased from the
digital display.
NOTES:
•
While the security lock is engaged all commands,
except the one to cancel the security lock, are disabled.
•
The security lock cannot be engaged while a menu is
displayed.
NU4QR/NA (SRT-2400 GB) Thu. Sept., 21/2000
English
35
