– 4 –
E01
→
The cylinder motor does not rotate.
E02
→
The take-up reel does not rotate.
E03
→
The capstan motor does not rotate.
E05
→
The loading and unloading cannot be performed with
the cassette inserted.
(The tape guide is caught.)
E06
→
Front unloading cannot be performed when ejecting
the cassette.
(Front loading can be performed.)
E07
→
Front loading and front unloading cannot be per-
formed when ejecting the cassette.
E08
→
The mechanism becomes 1 (BRAKE) while
moving from 2 (STOP), 3 (PLAY), 4 (STILL/
SLOW), and to 5 (REVERSE FRAME ADVANCE).
(The mechanism mode switch contact is faulty.)
E09
→
The mechanism becomes 7 (INITIAL) while
moving from1 (BRAKE), 2 (STOP), 3 (PLAY), 4
(STILL/SLOW), and to 5 (REVERSE FRAME
ADVANCE).
(The mechanism mode switch contact is faulty.)
E10
→
The capstan motor does not rotate, or the capstan
motor and the cylinder motor does not rotate with
the cassette inserted.
E11
→
The cylinder motor does not rotate with the
cassette inserted.
E12
→
The supply reel does tte tape eject when tape
unloading.
E13
→
The tape cannot be loaded with the cassette
inserted.
(But unloading can be performed.)
E14
→
The tape cannot be loaded normally.
E15
→
The mechanism does not move to the correct
position after tape loading.
E16
→
Mechanism position “3” cannot be used during
intermittent recording.
Error Codes (Self-Diagnosis Contents)
Mechanism Mode Display Contents
00
01
02
03
04
06
08
CASSETTE OUT
STAND-BY
STOP
STILL
REC-PAUSE
FRAME ADVANCE
PLAY
09
12
13
14
15
30
31
REC
CUE
REVIEW
FAST FORWARD
REWIND
REVERSE PLAY
REVERSE FRAME ADVANCE
32
33
INTERMITTENT REC
REVERSE STILL
Mode. No.
Mechanism mode
Mode. No.
Mechanism mode
Mode. No.
Mechanism mode