background image

SPECIAL PLAYBACK

Picture Search (Forward and Reverse)

1

Turn the SHUTTLE ring clockwise (or
counterclockwise), during normal playback. See
“SHUTTLE Ring Operation”.

ø

The image can be seen while the tape is
advanced (or rewound) at high speed.

2

To return to normal playback, release the SHUTTLE
ring.

NOTES:

œ

During picture search, noise (horizontal bars) will
appear in the picture.

œ

The sound is muted.

Still Image

1

Press the STILL/PAUSE button, during normal
playback.

ø

A still image can be viewed.

2

To return to normal playback, press the PLAY button.

NOTES:

œ

If still mode continues for 5 minutes or more, the VCR
will go into stop mode to avoid damaging the tape.

œ

If the image is unstable (rolling vertically), adjust the
vertical lock control to correct.

Frame Advance

1

Turn the JOG dial clockwise (or counterclockwise),
during still image mode.

ø

The still image is advanced (or rewound) of one
image (field).

ø

Turn the dial faster to increase the speed of the
frame advance.

2

To return to normal playback, press the PLAY button.

NOTES:

œ

During reverse frame advance, noise will appear in the
picture.

œ

If frame advance mode continues for 5 minutes or
more, the VCR will go into stop mode to avoid
damaging the tape.

Reverse Playback

1

Turn the SHUTTLE ring counterclockwise and hold it,
during normal playback. See “SHUTTLE Ring
Operation”.

ø

Reverse playback will start.

2

To return to normal playback, release the SHUTTLE
ring.

NOTES:

œ

During reverse playback, noise will appear in the
picture.

œ

Reverse playback is only possible during 8-hour
playback speed mode.

œ

The sound is muted.

Slow motion (Forward and Reverse)

1

Turn the SHUTTLE ring clockwise (or
counterclockwise) and hold it, during still image mode.
See “SHUTTLE Ring Operation”.

ø

Forward (or reverse) slow motion playback will
start.

2

To return to normal playback, press the PLAY button.

NOTES:

œ

If slow motion mode continues for 5 minutes or more,
the VCR will go into stop mode to avoid damaging the
tape.

œ

The sound is muted.

RC4QR/U3 (SRT-7072 GB) Tue. June, 29/1999

28

English

Summary of Contents for SRT-7072













































Reviews: