Adjust the lens focus with the focus lever.
Focus Lever
•The arrows are white when there is no correction.
•The direction of the arrow which are being corrected
turns red.
•The arrows disappear at the maximum correction.
•If you press the KEYSTONE button on the remote
control once more while the keystone dialog box is
being displayed, the keystone adjustment is canceled.
•The adjustable range can be limited depending on the
input signal.
•The projected picture may fluctuate momently
depending on the keystone adjustment.
•“Keystone” disappears after 4 seconds.
If a projected picture has keystone distortion, correct the
image with the Keystone function.
Press the KEYSTONE button on the remote control. The
keystone dialog box appears. Correct keystone distortion
with the Point
ed
buttons. Keystone adjustment can be
stored (p.41).
Reduce the upper width
with the Point
e
button.
Reduce the lower width
with the Point
d
button.
Keystone Correction
Remote Control
KEYSTONE button
POINT
ed
buttons
Focus Adjustment
22
Basic Operation
