SANYO VCC-HD4600 1080p 4 MEGAPIXEL DAY-NIGHT 10x AF NETWORK CAMERA WITH
AUDIO
Project Name/Project Number 28 23 29 - 20 Video Surveillance Remote Devices and Sensors
8.
Provide for Audio input and output directly to and from the camera
9.
Be capable of accepting power from
12V DC,
24V AC or IEEE
802.3af Power-over-Ethernet (PoE)
10. Be capable of transmitting analog NTSC video for setup and
installation purposes
11. Be capable of storing images on-camera via SDHC storage
B.
Camera shall be capable of the following adjustments and features:
1.
Support the following connections/interfaces
a.
2 alarm inputs (NC/NO)
b.
2 alarm outputs (NC/NO)
c.
12V DC,
24V AC Power Input
d.
Ethernet Port (Data and IEEE 802.3af PoE)
e.
HDMI Output (1080p @ 30 ips)
f.
Audio Mic In
g. Audio
Line
Out
h.
USB 2.0 for External HDD
(* requires dedicated HDD case)
i.
SDHC Card Slot
j.
BNC Analog Output
for setup, 75 ohm, approx.1 volt peak to
peak
2.
Ensure that any setup or instructional commands required to
program the camera, fine tune the camera or adjust any special
settings of the camera will be accomplished by using a simple on
screen display menu operated by control buttons on the side of the
camera.
3.
Provide image stabilization.
4.
The camera will provide a sixteen (16) character camera ID.
5.
Provide selection of languages from English, French, German,
Japanese and Spanish.
6.
Progressive Scan CMOS technology for image clarity.
7. Four
(4)
Megapixels
maximum resolution
8.
FourFive
levels of operator privileges shall be available.
a.
Admin level shall have full access to all functions.
b.
Operator1 level shall have access to all functions except
Network settings.
c. Operator
2
level shall have access to all functions except
configuration settings.
d.
Download level shall be restricted to downloading recorded
images only.
e.
Guest will be restricted to monitoring live video only.
9.
Provide Day & Night function allowing automatic changeover from
color mode to B&W mode as well as removal of an IR cut filter
during low light operation.
10. Automatic mechanical back-focus that provides Focus Assist
functionality to ensure images are always in focus and to remove
the need for IR-corrected optics for low-light use.
