SANYO VCC-HD4600 1080p 4 MEGAPIXEL DAY-NIGHT 10x AF NETWORK CAMERA WITH
AUDIO
Project Name/Project Number 28 23 29 - 20 Video Surveillance Remote Devices and Sensors
1. Operating
Temperature: 14°F to 122°F (-10
°
to +50
°
C) within 90%
relative humidity.
2.
Storage Temperature: -4°F to 158°F (-20°C to +70°C) within 70%
maximum relative humidity.
PART 3 - EXECUTION
3.1
EXAMINATION
A.
Examine areas to receive devices and notify adverse conditions affecting
installation or subsequent operation.
B.
Do not begin installation until unacceptable conditions are corrected.
3.2
PREPARATION
A.
Protect devices from damage during construction.
3.3
INSTALLATION
A.
Install devices in accordance with manufacturer’s instruction at locations
indicated on the floor drawings plans.
B.
Perform installation with qualified service personnel.
C.
Install devices in accordance with the National Electrical Code or applicable
local codes.
D.
Ensure selected location is secure and offers protection from accidental
damage.
E.
Location must provide reasonable temperature and humidity conditions,
free from sources of electrical and electromagnetic interference.
3.4
FIELD QUALITY CONTROL
A.
Test snugness of mounting screws of all installed equipment.
B.
Test proper operation of all video system devices.
C.
Determine and report all problems to the manufacturer’s customer service
department.
3.5
ADJUSTING
A.
Make proper adjustment to video system devices for correct operation in
accordance with manufacturer’s instructions.
B.
Make any adjustment of camera settings to comply with specific customer’s
need.
3.6
DEMONSTRATION
A. Demonstrate
at
final inspection that video management system used with
devices functions properly.
END OF SECTION
