Click
RECORDING
button in the configuration menu to display the RECORDING screen.
Configure the recording conditions on this screen if you intend to record video on a SD memory card installed in
the camera or an external hard disk drives.
Required operation privilege: admin, operator1
1
In [RECORD STREAM], select the stream you want to record for each recording mode.
Based on the [RECORDING] settings on the VIDEO & AUDIO SETTINGS screen, the selectable stream is
displayed for each recording mode.
The pull-down menu displays the image conditions of the selected stream.
OFF (no recording), STREAM1, STREAM2, STREAM3, STREAM4
NORMAL:
Normal live video is recorded.
Configure the recording time on the SCHEDULE SETTINGS screen.
ALARM:
Alarm video is recorded.
Configure the recording conditions in [ALARM EVENT1] to [ALARM EVENT4] (step
4
).
NETWORK FAILURE:
If a network failure occurs during network recording, backup recording is performed until the failure is resolved.
In [NETWORK FAILURE TIME], select the time from the occurrence of a network failure until the camera
recognizes it as a recording trigger.
15SEC, 20SEC, 30SEC, 40SEC, 50SEC, 1MIN, 2MIN, 3MIN, 4MIN, 5MIN
The setting values are interlocked among RECORDING, E-MAIL SETTINGS, and FTP SETTINGS
screens. (Note that the setting configured most recently will take precedence.)
2
To simultaneously record the video and sound, set [AUDIO] to “ON”.
3
To detect tampered images, set [ALTERATION DETECTION] to “ON”.
4
Configure recording conditions for [ALARM EVENT1].
You can configure four patterns of recording conditions (for ALARM EVENT1 to ALARM EVENT4) and use the
optimal pattern depending on the monitoring purpose of the camera.
Working with Administrator Configuration Screens 51/71
