background image

2

English

Instruction

This option board (Network) is an extension board that allows you to connect Sanyo’s CCD camera to your network.
After installing the option board on the camera, you can view live video from the camera using Web browser on your 
PC. If you want to view live videos from multiple cameras, install the supplied “VA-SW3050LITE” monitoring software.

System requirements

The system requirements for camera operation via network are as follows:

• PC: 

IBM PC/AT and compatibles

• OS: 

Windows 2000/Windows XP Home Edition/Windows XP Professional

• CPU: 

Pentium III (800MHz or higher)

• Memory: 

128MB or more

• Network interface: 

10Base-T/100Base-TX

• Display card: 

1024 x 768 pixels or higher, 16 million colors or higher

• Web browser: 

Internet Explorer Ver.6.0 or higher

Note:

• LAN cable must be CAT-5 or higher, and no more than 100 m (109.4 yds) in length.
• Image may be delayed and/or audio interrupted, depending on the environment of use.

Copyright notice

This instruction manual is copyrighted by SANYO Electric Co., Ltd. No materials contained in this manual may be 
reproduced in any format without the prior permission of the copyright holder.
Microsoft, Windows and Internet Explorer are registered trademarks or trademarks of Microsoft Corporation in the 
United States and other countries.
The official name for “Windows” used in this manual is Microsoft

®

 Windows

®

 Operating System. In this manual, 

note that the word “Windows” refers to both “Microsoft

®

 Windows

®

 2000 Operating System” and “Microsoft

®

 

Windows

®

 XP Operating System”.

Intel and Pentium are registered trademarks or trademarks of Intel Corporation and its subsidiaries in the United 
States and other countries.
IBM and IBM PC/AT are trademarks of International Business Machines Corporation.
UPnP is a trademark of UPnP Implementers Corporation, which is established by the UPnP Forum SC.
Java is a trademark of Sun Microsystems, Inc.
All other brands and product names in this manual are the registered trademarks or trademarks of their respective 
owners.

Summary of Contents for VA-50LAN





























Reviews: