Scanning system : PAL standard (625 TV lines, 25 frames/sec.)
Interlace : 2:1 interlace
Image device : 1/3-inch solid-state image device CCD
Picture elements : 795 (Horizontal) x 596 (Vertical)
Effective picture elements : 752 (Horizontal) x 582 (Vertical)
Synchronizing system : Internal sync, Line lock manually switchable
Resolution : 520 TV lines horizontally, 400 TV lines vertically
Video output level : 1.0 Vp-p/75
Ω
, BNC, composite
Video S/N ratio : More than 48 dB (More than 50 dB for AGC OFF)
Minimum required illumination : GAIN HI: Approx. 0.5 lx (F 1.2 lens)
(incandescent lighting) GAIN NOR: Approx 1.0 lx (F1.2 lens)
Backlight compensation : OFF/Multi-spot metering (2 modes)/Center-weighted metering
Iris function : Manual EI/AI switching
Electronic iris range : 1.0 lx to 50,000 lx (F 1.2 lens, GAIN NOR)
Electronic shutter : 8 speeds, selectable by switches
(1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 s)
Flange-back : 12.5 mm
±
0.5 mm
White balance : ATW/Manual switching
Gain control : Normal/High switching
Aperture : Sharp/Normal switching
Lens mount : CS mount
Environmental conditions : Temperature: -10
°
C – + 50
°
C (14
°
F – 122
°
F)
Humidity: less than 90 % RH (no condensation)
Power supply : 220 – 230 V AC, 50Hz
Power consumption : Approx. 3.6 W (with auto-iris lens)
Weight : Approx. 600 g (without lens)
Approx. 640 g (without lens) (U.K. model only)
SERVICE MANUAL
COLOUR CCD camera
FILE NO.
REFERENCE No. SM5310614
L5BD5/XE, UK
NOTE : 1. Parts order must contain model number, part number, and description.
2. Substitute parts may be supplied as the service parts.
3. N. S. P. : Not available as service parts.
Design and specification are subject to change without notice.
The components designated by a symbol ( ! ) in this schematic diagram designates components whose value are of
special significance to product safety. Should any component designated by a symbol need to be replaced, use only the
part designated in the Parts List. Do not deviate from the resistance, wattage, and voltage ratings shown.
PRODUCT SAFETY NOTICE
CONTENTS
1. DISASSEMBLY ....................................2
2. BOARD LOCATION ............................. 4
3. ADJUSTMENT ..................................... 5
4. PARTS LIST .........................................8
CIRCUIT DIAGRAMS &
PRINTED WIRING BOARDS ................. C1
SPECIFICATIONS
VCC-6580P
(Product Code : 117 142 00)
(Europe)
(PAL General)
VCC-6580P
(Product Code : 117 142 01)
(U.K.)
