AUTO MODE SETTINGS
A Sequential pan setting
Example: Sequential pan will be set to RANDOM, surveillance
location pause time will be 10 seconds, and pan
speed to next surveillance location will be 5
seconds.
1
Set the PRESET POSITIONS (See p00)
2
In the MAIN MENU, select SEQ for AUTO MODE and press
the ENTER button.
The SEQUENCE screen will appear.
3
Use the joystick lever (
d
or
c
) to select ORDER.
(Ex: RANDOM)
Available settings:
•
STEP: locations are shown sequentially pan from smallest
to largest PRESET POSITION numbers
•
RANDOM: locations are shown in a random sequentially
pan
4
Use the joystick lever (
j
or
l
) to move the cursor to
“5S” for PAUSE TIME, then use the joystick lever (
d
or
c
) to select the pause time. (Ex: 10S)
Available settings: To set pause times to be the same for all
surveillance locations regardless of
differing pause time values set for
individual PRESET POSITIONS, set the
PAUSE TIME to a numerical value. To
use the differing pause times set for
individual PRESET POSITIONS, set the
PAUSE TIME to “PRE”.
Pause times: 3S, 5S, 10S, 15S, 20S, 30S, 45S, 60S, PRE
(PRE uses individual values recorded for each
of the PRESET POSITIONS.)
5
Use the joystick lever (
j
or
l
) to move the cursor to the
SEQ SPEED value, then use the joystick lever (
d
or
c
) to
set the speed for panning to new surveillance locations.
(Ex: 5)
Available settings: 0 – 15 (fast)
6
Canceling a settings screen
•
Use the joystick lever (
l
) to select BACK for MENU, then
press the ENTER button. The MAIN MENU screen will
reappear.
•
To return to the normal screen, use the joystick lever (
l
c
) to select END for MENU, then press the ENTER button.
B Tour mode setting
Example: A 30 second image track of camera pan, tilt and
zoom operations will be recorded for TOUR 2.
1
In the MAIN MENU, select TOUR for AUTO MODE and
press the ENTER button.
The TOUR screen will appear.
2
Use the joystick lever (
d
or
c
) to select the TOUR image
track. (Ex: 2)
Available values for TOUR:
•
1: Recording of 30 seconds of camera pan, tilt and zoom
operations.
•
2: Recording of 30 seconds of camera pan, tilt and zoom
operations.
•
W: Recorded pan, tilt and zoom camera operations for
TOUR 1 and TOUR 2 are cleared after they are
combined to form a separate 60 second image track.
3
Use the joystick lever (
j
or
l
) to move the cursor to
TRACE, then use the joystick lever (
c
) to select a ON.
Then press the ENTER button.
The confirmation message “OK?” will blink under ON.
4
Press the ENTER button again.
The “OK?” message will disappear and “ON” will blink.
SEQUENCE
ORDER RANDOM
PAUSE TIME 5S
[SEQ SPEED]
15
MENU BACK
TOUR
TOUR 2
TRACE OFF ‚
MENU BACK
ENTER
TOUR
TOUR 2
TRACE ON ‚
OK?
– 36 –
English
