CAMERA SETTINGS
C
DAY/NIGHT setting
This lets you set the filming mode to color mode during times of
normal brightness, or to black & white mode which removes the
infrared filter to increase sensitivity when there is less light. The
three available DAY/NIGHT settings are AUTO, COLOR and B/W.
••••
AUTO: Automatic mode; The mode switches automatically
between color mode and black & white mode depending on the
luminance of the objects being monitored.
••••
COLOR: Color mode; Images are filmed in color regardless of
the luminance of the objects being monitored.
••••
B/W: Black & white mode; Images are filmed in black & white
regardless of the luminance of the objects being monitored.
Note:
••••
A sound may be heard when the colour image or black and
white image is switched. Also,the image will be distorted as
shown in Fig. 1. This is normal and does not indicate a problem.
••••
When using infrared lighting,if there is a strong reflection on the
subject, the optical filter may switch from black and white to
colour mode. Use only enough infrared lighting so that the
mode is not switched.
••••
AUTO mode setting
Note:
••••
If the backlight conpensation has been set to “MULTI”, the
backlight conpensation will be canceled when the mode is
switched to B/W.
••••
If “SENSE UP” has been set to “ON”, SENSE UP mode will be
activated after the mode switches to B/W mode.
1
In the MAIN MENU, select SET for CAMERA and press the
ENTER button.
The CAMERA SETTING screen will appear.
2
Use the joystick lever (
j
or
l
) to select SET for LENS,
then press the ENTER button.
The LENS screen will appear.
3
Use the joystick lever (
j
or
l
) to move the cursor to
DAY/NIGHT, use the joystick lever (
d
or
c
) to select the
mode (example: AUTO), and then press the ENTER button.
The D/N SETTING - AUTO screen will appear, and the “+9dB”
setting for “AGC MAX GAIN” will be blinking.
1
Sets the maximum AGC gain.
2
Sets the digital noise reduction.
3
Sets burst suppression. If other peripheral devices (such
as a multiplexer) are connected to the system, bursts
(distortion of image color) can occur when switching
between color and black & white. If this happens, change
the BURST setting to “ON”.
4
Sets the focus when switching to black & white mode.
5
Sets the switching level for color mode and black & white
mode. The three available settings are LOW, MID or HIGH.
In addition, the switching level can be set manually (ADJ).
☞
AGC MAX GAIN setting
4
Use the joystick lever (
j
or
l
) to move the cursor to
AGC MAX GAIN, and then use the joystick lever (
d
or
c
)
to select the gain.
Available settings: Select the maximum AGC gain from
+9dB, +12dB or +15dB.
LENS
FOCUS MANU ‚
ZOOM SET ‚
DAY/NIGHT AUTO ‚
VIEW ANGLE OFF
PRESET OFF
MENU BACK
(Fig. 1)
ENTER
CAMERA SETTING
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
VIEW SETTING 1 ‚
PRESET OFF
MENU END
LENS
FOCUS MANU ‚
ZOOM SET ‚
DAY/NIGHT AUTO ‚
VIEW ANGLE OFF
PRESET OFF
MENU BACK
ENTER
D/N SETTING - AUTO
AGC MAX GAIN +9·
DNR OFF
BURST OFF
FOCUS 1
LEVEL MID
PRESET OFF
MENU BACK
1
2
3
5
4
D/N SETTING - AUTO
AGC MAX GAIN +9·
DNR OFF
BURST OFF
FOCUS 1
LEVEL MID
PRESET OFF
MENU BACK
– 22 –
English
