Pickup device:
1/4”
Effective pixels:
752 (H) x 582 (V)
Horizontal resolution:
Over 520 TV lines
Lens:
22 power zoom lens, f=4.0-88 mm (F1.6-3.8),
Electronic zoom and gearing, Zoom speed setting possible
Electronic zoom:
16 power (combined with optic zoom gives 352 power max)
Max zoom magnification setting possible, Vertical resolution ON/OFF setting
Autofocus:
AUTO/MANUAL, AF area setting possible (3 step)
Iris control:
AUTO/MANUAL, 1/2 EV steps
Synchronization method:
Internal synchronization/Line lock, V phase adjustment possible
Lowest image illumination:
2.0 lx (F 1.6) at max AGC gain
0.06 lx (F 1.6) at x32 electronic sensitivity boost
S/N:
Over 48dB
Backlight compensation:
Multi-spot evaluative metering
5 spot centerweighted average metering, 48 multi-spot metering
Electric shutter:
•
Fast shutter speed mode (SHORT);
1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
•
Slow shutter speed mode (LONG); x1, x2, x4, x8, x16, x32
Electronic sensitivity boosting:
AUTO/OFF, works with auto iris, Up to x32 max setting possible
White balance:
ATW/AWC/MWB
AGC gain:
ON allows selection of
±
0dB, +6dB, +9dB, -6dB
OFF allows manual adjustment from 0dB to 30dB
Motion detector:
ON/OFF, ON allows setting of detection patterns on a 48 zone screen for
6 motion settings (size, masking, sensitivity, zoom, interval, alarm sign)
Privacy masking:
ON/OFF, max of 4 masked locations, Password lock possible
Alarm input/output (back panel control terminals):
Alarm input: 1 (for external alarm switch)
Alarm output: 1 (for sending a signal to the system controller or an alarm
detection device such as a buzzer)
Mirror image effect:
Horizontally (H), vertically (V), horizontally and vertically (HV)
Camera ID:
ON/OFF, 16 characters
View settings:
9 (0-8) screen files can be established, and each file can set
7 capturing characteristics such as iris
Communications:
Coaxial control, RS-485
Operational temperature/humidity:
-10 - 50
°
C/below 90 %RH
Power source:
24 V AC, 50 Hz/12-15 V DC,
Power consumption:
4.5 W,
Weight:
380 g
SERVICE MANUAL
COLOUR CCD Camera
VCC-ZM300P
(Product Code : 117 113 01)
(Europe)
FILE NO.
REFERENCE No. SM5310420
L5AA2/XE
NOTE : 1. Parts order must contain model number, part number, and description.
2. Substitute parts may be supplied as the service parts.
3. N. S. P. : Not available as service parts.
Design and specification are subject to change without notice.
The components designated by a symbol ( ! ) in this schematic diagram designates components whose value are of
special significance to product safety. Should any component designated by a symbol need to be replaced, use only the
part designated in the Parts List. Do not deviate from the resistance, wattage, and voltage ratings shown.
PRODUCT SAFETY NOTICE
CONTENTS
1. DISASSEMBLY AND
BOARD LOCATION ....................... 2
2. ADJUSTMENT ............................... 3
3. PARTS LIST ................................... 6
CIRCUIT DIAGRAM &
PRINTED WIRING BOARDS ........... C1
SPECIFICATIONS
