7
Features
Zooming Function
b
You can store the zoom and focus
settings of surveillance locations by
camera setting number.
&
[CAMERA]
⇒
[POSITION]
b
The electronic zooming function can be
used to zoom in the object at the
magnification power higher than that in
the optical zoom.
&
[LENS]
⇒
[ZOOM]
⇒
[EL ZOOM]
b
You can change the zooming speed.
&
[LENS]
⇒
[ZOOM]
⇒
[SPEED]
y
POSITION
POSITION
POSITION
SET
x 3.0
x 3.0
x 3.0
y
POSITION
POSITION
POSITION
SET
x 1.0
CAMERA 1
CAMERA 2
Alarm Settings
b
The camera has a built-in motion sensor.
&
[CAMERA]
⇒
[MOTION]
⇒
[ON]
b
The alarm condition can be detected by
connecting door switches or infrared
sensors.
&
[ALARM]
⇒
[ALARM IN]
Not detected
Detected
Remote Operations
b
The camera can be controlled remotely
by establishing the RS-485 or coaxial
super imposed communication.
&
[OPTION]
⇒
[SYSTEM]
b
You can switch the viewing mode
manually between the color mode and
the black/white mode.
&
[CAMERA]
⇒
[COLOR]
⇒
[EXT ALARM]
Camera Title
You can set and display the camera title.
This helps you confirm from which camera
the image is sent when multiple cameras
are connected. (Maximum 16 characters)
&
[OPTION]
⇒
[DISPLAY]
⇒
[TITLE]
ROOM1
ROOM2
ROOM1
ROOM2
Alarm Notice
b
The camera title you specified in the
[OPTION] menu blinks to notify that the
alarm condition is detected.
&
[ALARM]
⇒
[ALARM DISPLAY]
b
When the alarm condition is detected,
the object on the screen is zoomed in.
&
[ALARM]
⇒
[ALARM IN]
⇒
[ACTION]
⇒
[ZOOM]
b
A buzzer or lamp can be used to notify
you of detection of alarm when you are in
a distant place from the monitor.
&
[ALARM]
⇒
[ALARM OUT]
DOOR1
DOOR1
DOOR1
&
You can perform the settings on the camera by
navigating through the menu screens.
L5CB2_XE(INSTALLATION).book 7 ページ ２００８年１月２３日 水曜日 午後１時３８分
