background image

31

RECORDING

INSTANT TIMER RECORDING

0H30M

1H00M

1H30M

0H00M

9H00M

8H30M

Length Display

(each press increases

recording by 30 minutes)

INSTANT TIMER RECORD

MENU

INSTANT TIMER RECORD

CHANNEL

2

SPEED

SP

START

NOW

LENGTH

0H30M

Instant Timer Recording allows you to make a recording easily of
a preset length without using the program timer.

PREPARATION
• 
Turn on the power of both the VCR and the TV.
• Be sure the TV is set to the VCR output channel (3 or 4).
• If a direct VIDEO/AUDIO connection is made between the

VCR and the TV, set the TV’s source selector to VIDEO.

The channel number appears on the TV screen and indicator panel.
• If you are recording from another source via audio/video input

jacks (at the Rear or Front panel), select the LINE1 or LINE2.

The tape speed will appear on the TV screen and indicator panel.

The menu as illustrated, will appear on the TV screen.
Recording will start. (The TIMER indicator will light)  

At the end of recording the display will read 0H00, the VCR will
stop recording and shut off.
• During Instant Timer Recording, changing the channel on the

VCR will not be possible.

• You can stop the recording by pressing STOP .

Press  REC once to check the recording time. The recalled 
setting will automatically return to the TV screen after 6 seconds.

The recording time can be extended anytime by pressing REC.
Subsequent presses result in advancing the recording time by
30-minute increments.

• If you press PAUSE during instant timer recording, the VCR

will enter the normal recording mode.

• If the VCR is set to “0H00M”, the VCR goes to normal record-

ing mode.

NOTES

TO EXTEND THE RECORDING TIME

CHECKING THE RECORDING TIME

1

Insert the video cassette that the safety tab is in place.

2

Select the desired channel by using CH/TRACK (

/

or

number (0-9).

3

Set the TAPE SPEED item to desired speed (SP or SLP) by
pressing SP/SLP.

4

Press REC twice.

5

Press REC repeatedly to select the recording time length.

1

2

3

4

5

6

7

8

9

0

MENU

CH

TRACK

POWER

Ad JUMP

TV/VCR

100/ENTER

INPUT

SP/SLP

EJECT

SLOW

ENTER

CLK/COUNT

VCR

VOL

VOL

TV

CATV

CLEAR

PAUSE

STOP

REW

FF

PLAY

REC

Summary of Contents for VHR-H631










































Reviews: