35
RECORDING
DUBBING AND EDITING
STOP/
EJECT
POWER
VIDEO
L - AUDIO - R
LINE2
Camcorder:
Play
Another VCR: Play
Your VCR: Recording
OR
From
AUDIO and
VIDEO Output
From
AUDIO and
VIDEO Output
To AUDIO/VIDEO Input
1
Connect the camcorder’s (or another VCR’s) A/V outputs to your VCR as illustrated above.
2
Set the input channel “LINE2”. (Press INPUT to select LINE2.)
• If you have connected your VCR to the A/V input jacks on the rear of VCR, you should
select the input channel LINE1 by pressing INPUT twice.
3
Play the tape in the camcorder (or another VCR). If you have a TV attached to your VCR,
you can see the video playing.
4
When you desire recording to begin, press VCR’s REC once to start.
Before recording, please confirm the recording start position.
NOTE
If you wish to edit or dub your camcorder (or another VCR) recordings to this VCR, the rear
(or Front) panel mounted Audio and Video (A/V) input jacks make the connections quick and
easy. The direct A/V jacks will also provide better picture results than using the RF jack on the
rear panel.
