15
Technical specifications
Specifications are correct at time of printing. SANYO is constantly innovating and products may change
at any time without warning.
Specifications
General
Power
110-240V~, 50/60Hz
Power consumption
Approx. 12 Watts (Energy Saving mode: 3 Watts)
Video Head System
Double azimuth 4 heads, helical scanning (VHR-VK910A/NZ)
Rotary 2 heads, helical scanning (VHR-VK310A/NZ)
Tape speed
23.39 mm/sec (SP mode) 11.69 mm/sec (LP mode)
Tape Format
Tape width 12.7mm (0.5 inch)
Max. recording time
4 hours (SP mode, E-240 Tape) 8 hours (LP mode, E-240 Tape)
Rewind time
Approx. 65 (±10) secs (E-180 tape)
Dimensions
360 x 94 x 230mm (W x H x D)
Weight 3.2
kg
Operating temperature
5º C - 35º C
Operating humidity
Less than 80%
Timer
24 hours display type
Video
Television system
CCIR standard (625 lines, 50 fields)
PAL(B/G, D/K)/SECAM(B/G, D/K) colour signal
Recording format
PAL/MESECAM/NTSC 3.58/NTCS 4.43
RF reception
PAL B/G, SECAM B/G
RF OUT
PAL G
Input level
VIDEO IN (RCA) 1.0 Vp-p, 75 Ohm unbalanced
Output level
VIDEO OUT (RCA) 1.0 Vp-p, 75 Ohm unbalanced
Signal to noise ratio
More than 43 dBm
RF modulator
UHF channel 22-68 (Adjustable)
Audio
Input level
AUDIO IN (RCA)
- 6.0 dBm, more than 47 kohms
Output level
AUDIO OUT (RCA)
- 6.0 dBm, less than 1 kohms
Track
Mono track & Hi - Fi Track
Frequency response
Normal : 100 Hz - 10 kHz (-6/+3 dBm)
Hi - Fi : 20 Hz - 20 kHz (-3/+3 dBm)
Signal to noise ratio
Hi-Fi : More than 70 dB (JIS A filter)
Dynamic range
Hi-Fi : More than 85 dB (JIS A filter)
FCY970NW/FCY270W NA4NSS-ENG 8/28/03 9:18 AM Page 15