Setting the Drive Mode
Your camera features a Self-timer and Burst which can be set
in the Drive mode function in the Record Menu. The Self-timer
allows you to take images after a pre-defined delay. While
burst lets you take consecutive shots. This function is only
available in recording still images. The Drive mode setting is
automatically set to off when you turn off the camera.
To set the Drive Mode
1. From the Record menu, select
Drive Mode
.
2. Use the
or
keys to go through the selection.
3. Press the
OK
button to save and apply changes.
The table below shows the available Drive mode settings.
Icon
Item
Description
Off
Captures an image without time delay.
10 Sec.
Sets a 10-second delay to capture image after pressing the Shutter button.
2 Sec.
Sets a 2-second delay to capture image after pressing the Shutter button.
Double
Performs delay and capture twice:
•
Performs a 10-second delay, then captures the image.
•
Performs another 2-second delay then captures the image again.
Setting the AF Area
AF stands for Automatic Focus. This feature determines the
area on which the camera focuses.
To set AF Area
1. From the Record menu, select
AF Area
.
2. Use the
or
keys to go through the selection.
3. Press the
OK
button to save and apply changes.
The table below shows the available AF area settings.
Icon
Item
Description
Wide
The camera automatically selects focus area within the wide frame.
Center
The focus area is fixed on the center.
41
Summary of Contents for VPC-E2100
Page 79: ...Printed in china ...
