Getting Started 17
Taking your First Photo
English
2. Press the lefts side of the
Zoom switch
to zoom out from your subject.
Using the Self-timer and Burst Photography
The camera comes equipped with a self-timer which allows you to take photos after
a pre-defined delay. The burst photography feature allows you to take multiple con-
secutive photos by pressing and holding the
Shutter
button. The multi-burst pho-
tography feature allows you to take multiple (16) consecutive VGA photos by
pressing the
Shutter
button once.
To set the self-timer/burst mode:
1. Press the
Right/Self-timer/Burst mode
navigation button to cycle
through the self-timer(
or
) and burst photography options (
or
)
on the LCD screen.
2. Once you have selected an option, frame and take your shot. In self-timer
mode, the icon will flash until the time expires and the photo is taken.
3. After taking a photo, the Self-timer automatically exit. If you want to use these
functions for the next photo, press the
Right/Self-timer/Burst mode
navigation button again to activate the function.
Recording Voice Memos
You can add a
1-minute
voice memo to an image right after it’s taken.
To record a voice memo:
1. Hold the
Shutter
button to start recording and release the
Shutter
button to
stop recording.
2. While recording, the selected image is shown on the LCD screen.
3. The elapsed time screen shows the length of a voice memo.
Note:
A Voice Memo can also be added in Playback mode.