battery
charging
Before you can start using your WiPOQ you’ll
need to charge it.
Plug the charger into the mini USB input on the
side of the WiPOQ. Charge the WiPOQ for at
least two hours before switching it on. A screen
will appear showing a charging symbol.Why not
use this time to take a look through this user
guide and familiarise yourself with some of your
WiPOQ’s features?
Your WiPOQ has a battery life of
approximately 170 hours on standby and
120 minutes when active.
When a orange LED appears, your battery
power is running low and your WiPOQ should
be charged as soon as possible.
inserting the battery
1
Slide the battery cover clasp to pop open
the battery cover so you can remove it.
2
With the CE logo in the corner facing
upwards and to the edge of the WiPOQ,
slide the battery into place.
3
Replace the battery cover by slotting the
non-clasp edge back first. Then click the clasp
edge into place.
2
Scroll to and select
Next
using the Select key.
3
Choose any four-digit number and enter it
once into the field
New PIN
, and again in
Confirm PIN
. Scroll to and select
Next
.
Step 2 - Bluetooth
®
Next you will be asked to set up your WiPOQ’s
Bluetooth
®
settings.
1
Choose whether you want your device to
be
Discoverable
. This means that other
Bluetooth
®
users nearby will be able to see
your device when they are active.
Select
Yes
or
No
.
2
You can then enter a name for your
WiPOQ device.
3
When you have completed this step
click
Next
.
startup wizard
Press the red power button to turn your
WiPOQ on. The very first time you switch on
your WiPOQ a screen reading
Initialising...
will appear for a few seconds. To set your PIN,
Bluetooth
®
and the time and date easily, you can
run the Startup Wizard. Select
OK
by pressing
the Select key.
Step 1 - PIN
First you will be asked to enable your PIN.
1
Select
Yes
and you will be asked to enter this
PIN each time you turn on your WiPOQ.
TIP!
Enabling the PIN will help protect your
information from unauthorised access.
11
02
get going
02
get going
10