background image

SERVICE MANUAL

Digital Movie

VPC-C4EX

VPC-C4EXBL

(Product Code : 126 681 01)
(Europe)

(Product Code : 126 681 05)
(Europe)

Contents

1. OUTLINE OF CIRCUIT DESCRIPTION .................... 2
2. DISASSEMBLY ........................................................ 10
3. ELECTRICAL ADJUSTMENT .................................. 14
4. USB STORAGE INFORMATION
    REGISTRATION ...................................................... 20
5. TROUBLESHOOTING GUIDE ................................. 21
6. PARTS LIST ............................................................. 22
    CABINET & CHASSIS PARTS 1 ............................. 22
    CABINET & CHASSIS PARTS 2 ............................. 24
    ELECTRICAL PARTS .............................................. 26
    PACKING MATERIALS ............................................ 31
    ACCESSORIES ....................................................... 31
CIRCUIT DIAGRAMS &
PRINTED WIRING BOARDS ...................................... C1

The components designated by a symbol (   !   ) in this schematic diagram designates components whose value are of

special significance to product safety. Should any component designated by a symbol need to be replaced, use only the part

designated in the Parts List. Do not deviate from the resistance, wattage, and voltage ratings shown.

CAUTION : Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer.
Discard used batteries according to the manufacturer’s instructions.

NOTE : 1. Parts order must contain model number, part number, and description.

2. Substitute parts may be supplied as the service parts.
3. N. S. P. : Not available as service parts.

Design and specification are subject to change without notice.

SX718/EX, EX2, EX3, EX4, E, U, U2, GX

REFERENCE No. SM5310592

FILE NO.

PRODUCT SAFETY NOTICE

VPC-C4GXOR

(Product Code : 126 681 11)
(General)

VPC-C4E

(Product Code : 126 681 08)
(U.K.)

VPC-C4

(Product Code : 126 681 02)
(U.S.A., Canada, Taiwan)

VPC-C4S

(Product Code : 126 681 07)
(U.S.A.)

VPC-C4GX

(Product Code : 126 681 03)
(General)

VPC-C4EXS

(Product Code : 126 681 12)
(Europe)

Summary of Contents for Xacti VPC-C4



































Reviews: