– 19 –
2. Lens Adjustment
Preparation:
POWER switch: ON
If using a ready-made collimator, set to infinity.
Note:
Do not vibrate during the adjustment.
Adjustment method:
1. Set the camera 0 cm from the collimator. (Do not enter any
light.)
2. Set the camera so that it becomes center of the screen in
the collimator.
3. Double-click on the DscCalDi.exe.
4. Click the Focus, and click the Yes.
5. Lens adjustment value will appear on the screen.
6. Click the OK.
Adjustment value determination is effectuated using the "STD
AFPOS", "FOCUS" and “ZOOM” values.
If FOCUS=focus1, focus2, focus3, focus4, focus5, focus6,
ZOOM = pz_adj and the adjustment values fulfill the condi-
tions below, they are determined as within specifications.
Adjustment value determination
1003<=STD_AFPOS<=1103
focus1=0, -81<=focus2<=+81, -91<=focus3<=+91,
-85<=focus4<=+85, -81<=focus5<=+81, -90<=focus6<=+90
-19<=pz_adj<=19
3. AWB Adjustment
Preparation:
POWER switch: ON
Setting of pattern box:
Color temperature: 3100
±
20 (K)
Luminance: 900
±
20 (cd/m
2
)
Adjusting method:
1. When setting the camera in place, set it to an angle so that
nothing appears in any part of the color viewer except the
white section. (Do not enter any light.)
2. Double-click on the DscCalDi.exe.
3. Click the AWB, and click the Yes.
4. AWB adjustment value will appear on the screen.
5. Click the OK.
DscCalDi
x
OK
Focus Result
STD_AFPOS=1066
FOCUS=0,-4,-7,-3,-7,-5
ZOOM=15
!
Dsc Calibration
x
OK
Extention AWB Result:
1:
AGC3_ACQ=1016
AGC3_HMIX30=1016
AGC3_HMIX60=1016
4F_AGC=65535, 65535
WB=212,506,612
CHECK=127,129,101
WB_ND=221, 507, 599
CHECK_ND=127, 129, 142
IRIS_GAIN: 73
IRIS_OFFSET: 151
MS=3155,2682,2587,1192
IRIS=171,157,143,126
0
Copy
When all of the AWB adjustment screen
is not displayed, use a scroll bar.
Camera
Collimator
Camera
Pattern box