Using your TV
16
Sound
Select
MENU > Sound
, then the
Sound
menu
appears on the right with the following options.
Press
►
to enter and use
▲/▼
to choose an option.
Note: Some options may not be available for certain
signal sources. Some options may appear in the next
page of the Sound menu, you can press
▲/▼
to
switch.
Dynamic contrast:
Advanced technique for contrast
enhancement.
Black stretch:
You can use the Black stretch feature to
correct the contrast balance in the black areas of the
picture.
Flesh tone:
Enhance flesh tone.
RGB mode:
Make the picture Red, Green or Blue.
Game mode:
Enhance the picture quality to match
gaming environment.
MPEG NR:
Reduction of picture bulk and mosquito noise.
Noise reduction:
Reduces the noise level content in the
picture.
Film mode:
Enhance the picture quality to smooth out
frame transitions while watching a video.
Picture freeze:
Freeze the picture.
Color extender:
Enhance color for picture.
Gamma:
Adjust gamma of picture.
Note:The options offered depend on the program
you are watching.
Picture reset:
Select to reset the picture settings to
the factory default
.
Audio description:
Note:
The options offered depend on the program you
are watching.
Audio language:
Select your desired Audio Language.
Press
OK
/
►
to display its submenu.
Use
▲/▼
to choose an option.
Auto volume control:
Select
On
mode to reduce the
annoying blasts in volume during commercial breaks
and also
softer sounds in program material.
Eliminates the need to constantly adjust the volume.
SPDIF type:
Connect to an audio device through the
SPDIF output. Select
SPDIF type
and press
OK
/
►
to
display the options. Select a proper sound type from the
list for digital programs.
- If the current program outputs sound in
Auto
format,
then either
PCM
or
Auto
can be selected.
- If the current program does not output sound in
Auto
format, only
PCM
can be selected.
Otherwise no sound will be output.
Note:
The options you may choose depend on the
program you are watching. If you select
PCM
and the
sound output is ahead of the picture, you can select
SPDIF delay
from the
Sound
menu and press
◄/►
to adjust the delay time to synchronize the sound with
the picture.
SPDIF delay:
If the sound output does not match the
picture,press to adjust the delay time to synchronize
the sound with the picture.
◄/►
Advanced settings:
Press
OK
/
►
to display its submenu.
Use
▲/▼
to choose an option.
Audio delay:
If the audio output does not match
the picture, press
◄/►
to adjust the delay time to
synchronize the sound with the picture.
Balance:
Adjusts the volume between the left and
rightspeaker. Sets to “0 ”in the normal condition.
Sound preset:
Press
OK
to display the option
list. Use
▲/▼
to select a sound type from the list:
Standard,Stadium,Personal,Music,Movie
and
Voice.
HDMI mode:
Use
to scroll through the HDMI mode
settings:Auto,Graphic,Video.(Only in HDMI source)
◄/►
Picture
Sound
System
Network
Smart TV
Channel
Support
Sound preset
Standard >
Auto volume control
Off >
SPDIF type
PCM >
SPDIF delay
0
Advanced settings
TV placement
Desk top >
100Hz
50
1.5KHz
50
5KHz
50
10KHz
50
Balance
0
500Hz
50
Audio delay
0
Picture
Sound
System
Network
Smart TV
Channel
Support
On
Audio language
English
Advanced settings
Speaker Volume
30
Volume
Audio description
TV placement:
Use
▲/▼
to balance the sound between
Desk top
and
Wall mount
.
Advanced settings:
Press
OK
to display its submenu.
Use
▲/▼
to select the items.
Note: The options offered depend on the program
you are watching.
Picture
Sound
System
Network
Smart TV
Channel
Support
Advanced settings
Dynamic contrast
On
Flesh tone
On
Color extender
On
Film mode
On
MPEG NR
Low
Noise reduction
Low
Black stretch
Off
RGB mode
Off
Game mode
Off
HDMI mode
Auto
Picture freeze
Off
Gamma
0
