Sanyo XT-50UHD4S, Owner'S Manual

23

AudioLink Application Guide

AudioLink is a directional application for audio transmission.

It supports the setting of two working modes. The first mode

is to push audio from the TV to the audio peripheral. The

second mode is to push audio to the TV from a Bluetooth

playback device (such as a mobile phone). In the initial state,

the default mode is mode one. The following describes how

to use the two working modes.

Mode 1:

 The TV sends audio to the audio peripherals

Step1

: 

Press the AudioLink key on the remote Or click

on the homepage APPS to Launch AudioLink APP

,

as shown below Figure1

：

Figure1

Step2

：

Click [TV to Bluetooth Speaker]

, 

if the TV is already

in the current mode, it will jump to the search Bluetooth

device interface. At this time, you can search for nearby

Bluetooth audio peripherals, and click Connect, 

as shown below Figure2

：

If TV is in Mode 2 above

,

at this time, click [TV to Bluetooth

Speaker] to pop up a prompt dialog,Click Yes again to jump

to the above Figure2, as shown below Figure3

：

Figure2

Figure3 

3. Pay attention to the power supply of the device when

you are using a mobile hard disk or a digital camera.

If the power supply is not sufficient or not stable, you

may encounter problems during operating or can not

operate at all. In this case, please restart the device,

or unplug the device and plug it again, and ensure that

its power supply is normal.

4. The system supports standard USB1.1 and USB2.0

devices, such as standard U-disks, MP3 players,

mobile hard disks, etc..

5. For obtaining better audio and video quality, It is

suggested to use the external device which accords

with USB2.0 standard.

6. When playing the video with high compression ratio,

these phenomenons, such as picture standstill and

menu long time response, are normal.

7. For some USB device with power supply, such as large

size hard disk, MP4, etc., Suggests using it with power

to avoid electric power shortage. The parameters of

file, such as the pixel of picture, code rate of audio and

video file, sampling rate of audio file, exceed the limit

of the system.