User Manual & Datasheet V 2.1
Revision History
Revision
Date
Author(s)
Description
1.0
18 Jan 2014
RND
First Version Editing
1.1
25 Aug 2014
MRK
Applications Revision
1.2
28 Jun 2015
RND
Features Revision
1.3
10 Dec 2015
RND
Specs Revision
1.4
23 Jul 2016
RND
Specs Revision
2.0
08 Jan 2017
BRND
Revised Format
2.1
17 Sep 2017
BRND
Branding Revisions
1
•
Copyright:
All content on this document, such as text, graphics, logos and images is the property of Sapcon Instruments Pvt. Ltd.
The selection, arrangement and presentation of all materials on this document and the overall design of this document is the exclusive
property of Sapcon Instruments Pvt. Ltd.
•
The images shown in this manual may differ from the actual instrument / housing in terms of dimensions, color and design. Please refer
to GA drawings for dimensional details.
•
Values (of performance) described in this manual were obtained under ideal testing conditions. Hence, they may differ under industrial
environment and settings.
General Instructions
•
Instrument shouldn’t block the material filling inlet.
•
Secure the cover of housing tightly. Tighten the cable glands. For side mounting, the cable glands should point downwards.
•
For side mounting, provide a baffle to prevent the material from falling on the probe.
•
When handling forks, do not lift them using their tines. While using them with solids, ensure that material size is less than 10mm.
•
Deforming the shape of the tines may interfere with the fork’s operating frequency.
•
Make all electrical connections as instructed in the manual. Don’t power on the device before verifying the connections.
Sapcon Instruments Pvt.Ltd.
R
4
