http://www.sapido.com.tw
User’s Manual V1.0
157
6.
Channel Width
Please select “20MHZ” or “40MHZ” channel width to change the transmission channels.
7.
ControlSideband
Setting the Sideband "Upper" or "lower.”
8.
Channel Number
Please select your wireless network channel. There are Auto, 2~11.
9.
Broadcast SSID
Enable or disable the SSID broadcast function. Disable this feature can provide more
security of your WLAN.
10. Data Rate
Rate at which data can be communicated (bps); auto, 1M, 2M, 5.5M, 11M, 6M, 9M, 12M,
18M, 24M, 36M, 48M or 54M to be selected from the drop-down list.
11. Associated Clients
Check the WiFi ISP connectors and the connecting status.
12. Enable Mac Clone (Single Ethernet Client)
Copy the MAC Address for identity of some ISPs.
13. Enable Universal Repeater Mode (Acting as AP and Client simultaneously)
Enable Universal Repeater Mode, N+ 3.5G Mini Server Router will act as a wireless AP
and AP client at the same time, and able to link to another AP.. It uses AP client function
to connect to a Root AP (any AP) and uses AP function to service all wireless stations
within its coverage. All the stations within the coverage of N+ 3.5G Mini Server Router
can be bridged to the Root AP. It can help user to extend the coverage of wireless
network.
How to Enable URM (Universal Repeater Mode)
User could enable URM in wireless basic setting page as shown in following figures.
Step 3. Get back to menu “Network Config” and write down the SSID, channel
and security.