http://www.sapido.com.tw
User’s Manual V1.0
19
Chapter 2
Hardware Installation
2.1
Diagram of Connecting Hardware to N+ 3.5G Mini Server Router
N+ 3.5G Mini Server Router is a portable and convenient wireless solution for the
traveling businessmen delivering 802.11n wireless connectivity with a maximum wireless
signal rate of up to 300Mbps. Use it in conference rooms, hotel rooms, or even at
hotspots. The Wireless Pocket Router/AP might be small in size, but is huge in
functionality, supporting multiple operation modes, including Access Point (AP) mode,
Router mode, and Wireless Client mode. You can switch among these modes easily by
using N+ 3.5G Mini Server Router's 3-way configuration slide switch. Moreover, there
are 2 USB port support with N+ 3.5G Mini Server Router; user can plug the USB devices,
including Flash Disk, Web Camera, Printer and 3.5G USB Dongle.
Warning: Before sliding the switch modes, please power-off the router firstly. Moreover, please stay
over 5 seconds between power-off / power-on condition.
2.1.1
Hardware Connection and Application for Router Mode
When N+ 3.5G Mini Server Router switches to Router Mode, there will be each WAN and
LAN port existing, the administrator can do the Quick Setup including WAN Setup, LAN
Setup, Wireless Setup, Time Server Setup, Password Setup, USB Disk Management
Setup, User Account Management Setup, Firewall Setup, QoS Setup, FTP Server Setup,
Web Camera Setup, Print Server Setup and Samba Server Setup.
2.1.2
Hardware Connection and Application for AP Mode
Under AP Mode, it supports 2 LAN ports as Bridge, and user can connect to N+ 3.5G Mini