◦
Click on OK button.
Netscape Navigator Users:
◦
Click on Edit > Preferences > double-click Advanced in the Category
window.
◦
Click on Proxies > select Direct connection to the Internet > click on OK
button.
◦
Click on Edit again and then click on Preferences.
◦
Under category, double-click on Advanced and then click on Proxies.
◦
Select Direct connection to the Internet and click on OK button.
◦
Click on OK button.
•
Web page hangs, corrupt downloads, or nothing but junk characters is being
displayed on the screen. What do I need to do?
A:Force your NIC to 10Mbps or half duplex mode, and turn off the "Auto-
negotiate" feature of your NIC as a temporary measure. (Please look at the
Network Control Panel, in your Ethernet Adapter's Advanced Properties tab.)
•
Why can't I connect to the Web Configuration?
A:you can remove the proxy server settings in your web browser.
5.5 MB-1132G3 Setup
•
Why does MB-1132G3 ’s setup page shut down unexpectedly?
A:If one of the pages appears incompletely in MB-1132G3 ’s setup pages,
please click on Logout item on the Main Menu before shutting it down. Don’t
keep it working. Then, close Internet browser and open it again for going
back to the previous page.
•
I don’t know how to configure DHCP.
A:DHCP is commonly used in the large local network. It allows you to
manage and distribute IP addresses from 2 to 254 throughout your local
network via MB-1132G3 . Without DHCP, you would have to configure each
computer separately. It’s very troublesome. Please Open Internet browser >
Input 192.168.1.1 in the website blank field > Select DHCP Server under the
IP Config Menu. For more information, please refer to Router Mode or AP
Mode).
•
How do I upgrade the firmware of MB-1132G3 ?
A:Periodically, a new Flash Code is available for MB-1132G3 on your product
supplier’s website. Ideally, you should update MB-1132G3 ’s Flash Code
using Firmware Upgrade on the System Management menu of MB-1132G3
Settings.
•
Why is that I can ping to outside hosts, but cannot access Internet websites?
A:Check the DNS server settings on your PC. You should get the DNS
servers settings from your ISP. If your PC is running a DHCP client, remove
any DNS IP address setting. As the router assign the DNS settings to the
DHCP-client-enabled PC.
•
MB-1132G3 couldn’t save the setting after click on Apply button?
