_
English
_
DO READ THESE INSTRUCTIONS BEFORE USING YOUR COOKING PLATE
AND KEEP THEM FOR FUTURE REFERENCE, ALWAYS FOLLOW THEM CAREFULLY.
1.
PREPARATION FOR USE
First check that the voltage marked on the product corresponds with your supply voltage.
2.
HOW TO USE
•
Select a suitable position close to an electric socket.
•
Having suitably positioned the appliance, ensure that the controls are in the 0 position.
•
When using the cooking plate for the first time, the invisible protective coating may still not be
removed. It may or may not emit some smoke, but it is normal reaction.
•
Ensure that there are no foreign articles such as water, food on the heating element before turning
on the appliance.
•
The cooking plates are now ready for use.
3.
HINTS AND TIPS
•
Always use
flat-bottomed
saucepans/containers which make good contact with the cooking plates.
•
The cooking plate(s) have a range of temperatures. Use the lower heat settings (0 to 3) for
simmering and gentle heating and the high settings (4) to MAX for boiling.
•
Due to the cooking plate(s) construction, a certain amount of residual heat will remain after
switching off. This may be used to keep some foods warm for a short period.
4.
SAFETY IN USE
•
Choose a position convenient to an electrical socket but away from sources of water.
•
The work surface must be heat resistant, dry and approximately 75cm high.
•
A gap of at least 5cm must be left around the sides of the appliance, since the sides of the appliance
may become hot during use.
•
The mains cable must not touch any part of the appliance and must be kept out of the reach of
children.
•
Do ensure this appliance is positioned away from the edge of work surfaces and out of the reach of
children and people insensitive to heat.
•
This appliance must not be positioned beneath cupboards.
•
Do not attempt to move cooking plate until completely cooled down nor whilst pan(s) are stood on
them.
•
Ensure pans are situated centrally on the cooking plate(s) and pan handles are safely positioned.
•
Care must be taken when using oil or fat for cooking. Do ensure overheating does not occur, by
maintaining close supervision at all times.
•
Once the cooking is over, turn the switch to “0” position.
•
Make sure to unplug the cooking plate from the electrical socket after use.
•
Do not leave the appliance unattended in the presence of children.
•
Do not place the unit near textile material such as curtains or hanging clothes in order to pervert
fire.
•
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
