_
English
_
CLEANING AND MAINTENANCE
DISASSEMBLING
•
Make sure that the motor has stopped completely.
•
Disconnect the plug from the power outlet.
•
Disassemble by reversing the steps from 1-6 pictures.
•
To remove the fixing ring easily, place a screwdriver as
illustrated on Fig.12 and press down to unscrew the ring.
•
Place a screwdriver between the cutting plate and the head as
illustrated on Fig.13 and remove the plate.
•
Press the unlock button, move the head as per direction
illustrated on Fig.13, then you can take out the head.
CLEANING
•
Remove meat, etc. Wash each part (except body) in warm
soapy water.
•
A bleaching solution containing chlorine will discolor
aluminum surfaces.
•
Do not immerse the motor housing in water, but only wipe it with a damp cloth.
•
Thinners and petrol will crack or change the color of the unit.
•
Wipe all the cutting parts with a cloth damped in vegetable oil.
