The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
+1 215.322.6063 P.
+1 215.322.8498 F.
www.sapling-inc.com
23
Windows 7
1. Insert the USB to RS485 converter into a USB connector port.
Note:
If computer does not recognize the USB to RS485 converter after it is plugged in, unplug the converter, rotate it, and plug it back into the
USB port.
2. Plug in the USB to RS485 converter into the J7 port on the board, located on the back of the digital clock.
3. Power up the digital clock.
4. Computer will indicate ‘Found New Hardware.’
5. It will then display, ‘New Hardware Installed.’
6. Next, click on Start menu --> Control Panel --> Hardware and Sound.
7. Click on “Device Manager” under Devices and Printers.
Installing the sbdconfig.exe Software
*Instructions continued on next page
Please Note:
•
The sbdconfig.exe software only works with the SBL 3200 or 3300 series.
•
Sapling’s USB to RS485 converter needs to be purchased separately. Other USB to RS485 converters will not work.
•
When using the SBDConfig software, move JP6 to Pins 2&3 on the back of the digital clock board.
•
SBL 3200/3300 clocks shipped before March 27, 2014 require an older version of the SBDConfig software, while SBL 3200/3300 clocks
shipped after March 27, 2014 require a newer version of the SBDConfig software. If your clock does not respond to your version of SBDConfig,
you may download both versions of the program at: http://www.sapling-inc.com/digital-clock-programming/.
sb
dc
on
fig
.e
xe
so
ft
wa
re