21 22
30
The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
Double and Flag Mount Installation
21) If you find that the mounting pieces are spaced
too far apart, use a #2 Allen wrench to loosen the
securing nut, slide the mounting receptacle to a
better position, then tighten the securing nut again.
Repeat until you are able to slide the clock onto the
mounting pieces.
22) Use a Phillips screwdriver to insert and tighten
the securing screws through the mounting piece
and into the clock receptacle. Check to confirm
that the clock is locked in place by attempting to
lift the clock off of the mounting piece. If the clock
does not move, then it was installed successfully.
Removing these same screws will allow you to take
the clock off of the wall if you feel the need to
perform maintenance on it.