1.
Clock Name
- This field allows the user to set a name used to identify the clock on the Network Monitor. This
name is also used to identify the clock in a network list while the clock is in Direct-Connect mode. The name must
be fewer than 26 characters.
2.
Serial Number
- The clock’s serial number. It cannot be changed.
3.
MAC Address
- This field shows the clock’s permanent machine address. It cannot be changed.
4.
Select Network*
- The clock scans for access points that are broadcasting their network name (SSID), and
allows the user to select one instead of manually entering the name in the Network box. You may need to refresh
the web page for more network names to appear.
5.
Network*
- This field allows the user to connect the clock to a wireless network by entering the network name
(SSID). The information in this field is overridden if a value was selected in the Select Network field.
6.
Network Password*
- This field allows the user to connect the clock to a wireless network by entering the
network password. Network passwords must be 25 characters or fewer. The characters of the password can be
shown by placing the computer’s cursor over the word “show.”
THIS IS ALSO USED AS THE PASSWORD FIELD
FOR WPA2-Enterprise NETWORKS.
7.
DHCP Auto On
- Allows the user to set whether or not the clock will use a DHCP server to determine the IP
address for the clock.
8.
IP Address
- This field will display the clock’s IP address. If DHCP Auto On is enabled, this address will be
assigned by the DHCP server. If DHCP Auto On is disabled, then the user may set their own static IP address.
* Not present when connecting to the clock with a physical network cable.
1
3
5
7
2
4
6
8
Wi-Fi &
Wired LAN
Sync Only
CONTINUES ON NEXT PAGE
52
The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
Web Interface - Network Settings
Wi-Fi
Sync
Only