7.
Seconds Temp Displayed*
- If a temperature sensor was installed on the clock, the clock will display the
temperature for the number of seconds entered in the box. After the selected amount of time passes, the clock will
change to show the Time or Date. If a time of 0 is selected, the clock will not display the temperature. If Time and
Date Displayed are set to 0, the clock will only display the temperature.
8.
Character Set
- Allows the user to select a text font for the numbers on the display. Enter a number from 0
through 3 to choose one of four character sets.
9.
Blink Colon After
- If the clock does not receive new time data in the entered time span (minutes and seconds)
the colon will blink.
10.
Submit
- Applies any changes to the previous options when pressed.
*Note:
If the Time, Date, and Temp Displayed are ALL set to 0, the display will turn completely blank. It will turn on
for count down/up, and off again once the counting has been cleared.
Web Interface - Display Settings (ctd.)
10
7
9
8
60
The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com