~ 15 ~
2-7 Jumper Settings
If the CMOS data becomes corrupted or you forgot the supervisor or user
password, clear the CMOS data to reconfigure the system back to the default
values stored in the ROM BIOS.
To clear CMOS data, please follow the steps below.
1.
Turn off the system.
2.
Change the jumper from “1-2” to “2-3” position
for a few seconds.
3.
Replace the jumper back to the “1-2” position.
4.
Turn on the system and hold down the <Del> key
to enter BIOS Setup.
