~ 20 ~
Clear CMOS Jumper
This mainboard contains a jumper (CMOS) that can clear CMOS data. If the
CMOS data becomes corrupted or you forgot the supervisor or user password,
clear the CMOS data to reconfigure the system back to the default values stored
in the ROM BIOS.
Settings:
1-2: Normal (default)
2-3: Clear CMOS
To clear CMOS data, please follow the steps below.
1.
Turn off the system.
2.
Change the jumper from “1-2” to “2-3” position for a
few seconds.
3.
Replace the jumper back to the “1-2” position.
4.
Turn on the system and hold down the <Del> key to
enter BIOS Setup.
1
3