~ 13 ~
Use M.2 2242 only:
1.
Remove screw and leave the standoff
on nut.
2.
Align the notch on the M.2 2242 edge
connector with the tab in the slot.
Plug the M.2 2242 firmly into the slot at a
20-degree angle, and until it clicks into place.
3.
Fasten M.2 2242 onto the standoff with screw.
Use M.2 2280 only:
1.
Remove all screws and standoff.
2.
Align the notch on the M.2 2280 edge
connector with the tab in the slot.
Plug the M.2 2280 firmly into the slot at a
20-degree angle, and until it clicks into place.
3.
Fasten M.2 2280 onto the nut with screw.
4.
Please keep the remaining screw&standoff for
use when needed.
Note:
The mainboard in the picture is not
actual mainboard, just for reference.
Supported module type:
2242 / 2280
Key M Slot
Key M
5 contacts
5 pins
Unit: mm
22
22
80
42
1
Screw&standoff
standoff
screw
+
Split to
3
1
2
20
o
standoff
screw
3
20
o
2
