myHotTub
spa pool
prior to filling
Attaching cover lifter
Once your spa is in it’s final position, we
recommend attaching your cover lifter before
you fill your spa, to ensure enough clearance
for the lifter mechanism to operate freely.
Do not place too close to nearby walls
All cover lifters have different clearance parameters
Access in cabinet power supply BEFORE FILLING
Before filling your spa, remove door panel and bring
power out of the corner that’s applicable especially
if 15amp cord & plug are supplied as cord is 4.5MTS
in length from the control box.
Check the drain valve
Ensure the drain valve of the spa pool is closed.
Please note: all drain valves are external,
excluding myHotTub (as above inside cabinet)
hose
spa pool
equipment access
remove these screws
with an allen key
where applicable
remove the raised
joiner strips which
hold panels in place
where applicable
removable side panel
extends up under
acrylic flange (flange
is 90mm in height)
ideal electrical
conduit access
through corners
of spa as we’ve
allowed 35-40mm
access to enable
conduit to be hidden
Detail for removing the cabinet doors,
plumbing location, electrical power cord
/ conduit access to power control box
Owners Manual
|
9
8
|
Owners Manual
Summary of Contents for myHotTub
Page 1: ...Spaownersmanual ...
