37
Saratoga Spa
®
OWNER'S MANUAL
Roto Stream™ Valve Cleaning
1 .
Turn power off to the spa .
2 .
Unthread Roto Stream™ Valve cover by turning valve cover counter clockwise .
3 .
Remove complete Roto Stream™ Valve assembly by pulling outward .
4 .
Remove and clean free of any debris in and on strainer screen and valve assembly .
5 .
Re-assemble and re-thread Roto Stream™ Valve into place .
note:
Nylon suction cover "socks" need to be in place for models with the Roto Stream™
Valve . Failure to use the nylon suction covers may result in internal mechanical damage and is
not covered by warranty . Please contact your dealer if they need to be replaced .
replacing the Spa color blast™ LEd Light
The spa Color Blast™ LED Light is located inside of the equipment compartment . Remove the
front access panel by first removing the screws on the access panel . Then locate the light housing
mounted to the spa shell . Use a flathead screwdriver, placed into slot on back of light housing,
turn and remove light housing and remove LED Color Blast™ light fixture . Install replacement
LED Color Blast bulb unit (available from your Saratoga Spa® dealer). Then re-attach light
niche into light housing and close equipment compartment by securing the access panel .