38
Saratoga Spa
®
OWNER'S MANUAL
controL panEL FunctIonS
MaIn controL panEL
The panel/topside will indicate the operations of the hydro jet pump(s), spa light, water
temperature and will display diagnostic symbols .
Saratoga Spa® models are equipped with a main control panel located on the top collar of the
spa. The main control panel controls all of the spa functions. It displays the spa’s status and any
diagnostic messages . The main control panel and digital display are illuminated by a light from
the inside of the panel .
The Lincoln, Empire, and Broadway models have an additional satellite panel located across
from the main control panel that allows the spa user to operate the Jets 2 function from the
other side of the spa .
MaIn controL panEL buttonS and dIgItaL dISpLaY
The main control panel has buttons which the spa user presses to set the temperature, vary the
intensity of the light and activate or deactivate the hydro jet pump(s). The control panel also has
a digital display that displays the spa diagnostics (ie-temperature setting, jet functions or error
messages).
temperature control
The set temperature range is from 80°F (26°C) to 104°F (40°C). The temperature of the spa
water will automatically be 100°F (37°C) the first time that power is applied. This is the default
temperature setting programmed at the factory .
To display the set temperature of the spa, press the Warm or Cool button once .
To raise the set temperature of the spa, press the Warm button a second time . Each press of the
Warm button will continue to raise the set temperature .
To lower the set temperature of the spa, press the Cool button a second time . Each press of the
Cool button will continue to the lower set temperature .
note:
When first powered up the water temperature will not be displayed until the pump has
been running for at least two minutes .
note:
The temperature shown on the display without pressing the Warm or Cool button
reflects the temperature of the water at that particular moment .
