19
E
Equipment Maintenance
Saratoga Spa Jet Selector Maintenance
After a period of time it may become difficult to adjust and rotate the valves. It is necessary
to clean the valves to ensure that they continue to perform well. The following instructions
will walk you through the steps.
1. Turn power off to the spa.
2. Un-thread valve cover by turning valve cover counter clockwise.
3. Remove complete valve assembly, by pulling outward.
4. Clean or remove debris from valve or diverter.
5. Re-assemble and re-thread valve cover.
Replacing the Spa’s Light Bulb
The spa’s light bulb is located inside of the equipment compartment. Remove the front access
panel, by first removing the screws on the access panel. Then locate the light housing
mounted to the spa shell. Grasp the bulb holder on the back of the light niche. Turn bulb
holder counter clockwise to release it from the light niche. Pull bulb out of receptacle and
replace it with a new GE 912 bulb. Re-attach the light bulb holder to the light niche by
turning the light bulb holder clockwise.
Note: colored lenses for the underwater mood light are an option.