A-Series
With Display
™
ACCESS MANAGEMENT SYSTEM
Models 3006-2xx, 3007-2xx, 3028-2xx, and 3029-2xx
Programming and
Operations Guide
The Sargent & Greenleaf A-Series with Display
TM
Locks (models 3006-2xx, 3007-2xx, 3028-2xx, and 3029-2xx) are
designed to provide a high level of security combined with flexible features that allow multiple levels of control over
normal operations and service access. Follow these instructions carefully to get the best possible use from your lock.
•
For instructions in English, visit the website: www.sargentandgreenleaf.com/ASeriesWithDisplay/
•
Für Anweisungen auf Deutsh besuchen Sie bitte die folgende website: www
•
Pour obtenir les instructions en français
,
veuillez consulter le site ci-dessous:
•
Para obtener instrucciones en español
,
visite la siguiente página web:
Introduction
•
It is recommended you run the latest version of Lock Management System (LMS). Running an older version of LMS
may not give you access to all features of lock firmware.
•
S&G electronic safe locks incorporate sophisticated electronic circuitry. These locks are suitable for indoor use
only.
•
The keypad should only be cleaned with a soft, dry cloth. Avoid using solvents or liquids.
•
Never attempt to lubricate the lock or keypad components. Service should only be performed by a qualified
technician.
•
Anytime the keypad is removed from its mounting base, either disconnect the lock cable or support the keypad
so that it does not hang by the cable. This could adversely affect the cable connector or the keypad receptacle.
•
Each time a button is pressed and the lock accepts the input, it will emit a beep, the red LED on the keypad will
flash momentarily, and a * will be displayed on the screen.
•
All the letters of the English alphabet are displayed on the keypad. This allows you to devise numeric,
alphanumeric, or word-based codes. Use whatever approach works best for you.
•
All codes end with #. This signals to the lock that you have finished entering all digits of the code.
•
Personal data directly related to a code holder, such as a birthdate, should not be used in making up a lock code.
Avoid codes that can be easily guessed.
•
After the lock is changed to a new code, check the lock function by locking and unlocking at least
3 times with the container door open. Make sure the lock functions correctly before closing the door.
•
The audit features, peripheral devices and accessories, software features, one-time code functionality, USB
functionality, and other additional features are beyond the scope of the UL 2058 standard and are not a part of the
UL Listing.
Sargent & Greenleaf, Inc.
One Security Drive
Nicholasville, KY 40356
Phone: (800)-826-7652 Fax: (800)-634-4843
Phone: (859)-885-9411 Fax: (859)-887-2057
Sargent & Greenleaf S.A.
9, Chemin du Croset
1024 Ecublens, Switzerland
Phone: +41-21 694 34 00
Fax: + 41-21 694 34 09
Copyright 2005-201
8
Sargent & Greenleaf, Inc
.
Document 630-902
Revised 0
5
/1
0
/201
9
