19
Sargent and Greenleaf
Revision 02/15/2022 Document: 630-600
3.16 — Command 83: Disable Time Delay Override
If you do not want the Time Delay Override (TDO) function available, it can be permanently disabled, and all of the time delay override
commands will no longer work.
Disable time delay override
3.17 — Command 90: Lock Serial Number Verification
The A-Series lock serial number can be audibly retrieved when visual indicators are not available. The lock will give a low beep for the
number 0 and 1 beep counting up any number great than 0. The lock will pause between each number. You can verify the lock serial
number using the following process.
Enter: 90* on the lock keypad.
LSN: 50013968
3.18 — Command 93: Aseal Code Verification
The A-Series lock’s Aseal close code can be audibly retrieved when there is not any visual indicator available. The lock will give a low
beep for the number 0 and 1 beep counting up any number great than 0. The lock will pause between each number. You can verify the
lock serial number using the following process.
Enter: 93* on the lock keypad.
Aseal 103968
Process
Set a 5-minutes time delay
1) Enter: 83 *
1) Enter: 83**
2) Enter: Programmer Code + #
♪♪♪♪♪
2) Enter: 00123456 #
♪♪♪♪♪
3) Enter: 1 (confirm TDO disable) + #
♪♪♪
3) Enter: 1 #
♪♪♪
4) Enter: 1 (confirm TDO disable) + #
♪♪♪
4) Enter: 1 #
♪♪♪
5
5 high beeps
0
1 low beep
0
1 low beep
1
1 high beep
3
3 high beeps
9
9 high beeps
6
6 high beeps
8
8 high beeps
1
1 high beep
0
1 low beep
3
3 high beeps
9
9 high beeps
6
6 high beeps
8
8 high beeps
NOTES:
Once the TDO features have been disabled using command 83, there is no way to ever use time delay
override with the lock changes window.
Once the Programmer code has been changed, TDO disable option is no longer available.
