12/20/13
1-800-810-WIRE • www.sargentlock.com • A8152C 19
Copyright © 2014, Sargen
t Manufacturing Company
, an A
SS
A AB
LO
Y G
roup company
. All right
s reser
ved
.
Reproductions in whole or in par
t without express writ
ten permission of Sargen
t Manufacturing Company is prohibited
.
IN120 Cylindrical Lock
1. Insert key into cylinder and rotate (Fig. 14A).
There should be no friction against lock case, wire
harness or any other obstructions.
2. Check that the key retracts the latch.
3. The key should rotate freely.
4. Try the inside lever; ensure it retracts latch.
5. Present a valid credential
*
(Fig. 14B) to unlock outside
lever; turn lever handle to ensure latch retracts.
Operational Check
7
Fig. 14B
Note
: The credential should approach the inscription
on the reader as indicated (Fig. 14B) to ensure
the credential is read properly.
Do not wave credential.
Fig. 14A
*
Twenty (20) seconds after lock initialization
(single beep with lock motor actuation).
Summary of Contents for Assa Abloy IN120
Page 2: ......
