background image

Sargent Electrical Services Ltd. 

 

Copyright 2005 

Issue 03 

Page 9 of 11 

12 May 2005 

 

 

4.4  Warning Messages 

Vehicle 
Battery 

Dangerously 

Low 

 

This WARNING display indicates that the 
Vehicle battery voltage is low (10.9 volts or 
less).  The panel will beep for one minute and 
then switch over to the Leisure battery to 
prevent draining the Vehicle battery. 

You can switch over to the 
Leisure battery immediately 
(and cancel the beep) by using 
the battery selector switch 

System 

disabled 

Engine 

started! 

 

This WARNING display indicates that the 
system has been disabled because the vehicle 
engine is running 

EMC (Electro Magnetic 
Compatibility) directive 
89/336/EEC requires that 
electrical accessories within the 
vehicle are disconnected while 
the vehicle is in motion 

 

4.5  Event Timer example 

The event timer is designed to allow the leisure vehicle user to turn the 12v power on or off (same as using 
the control panel power button) without being in the vehicle.  This allows lights or other equipment to be 
turned on or off at a predetermined time. 

 

Example - to turn on one interior light at 11.00pm 

Ensure the clock is set to the correct time 

Scroll to the ‘Set Event Timer?’ screen 

Following the instruction in section 4.3, set the ON time to 23:00 and the OFF time to 24:00 

Scroll to the ‘Event Timer=’ screen and select ON 

Scroll to the main control panel display and ensure a hash (#) is displayed in the right of the display 

Turn all lights and 12v equipment off in the vehicle except the light that you want the event timer to 
automatically switch on 

Turn the 12v power off on the control panel 

Exit the vehicle 

 

At 11:00pm (23:00) the control panel will switch the 12v power on and therefore any equipment that was left 
switched on will be turned on.  The 12v power will be switched off at Midnight (24:00). 

 

Summary of Contents for EC200












Reviews: