Passport 1000 P2 WiFi Exit Device
Copyright © 2014, Sargent Manufacturing Company
, an ASSA ABLOY Group company
. All rights reser
ved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
03/31/14
12 1-800-810-WIRE • www.sargentlock.com • A8012F
10 Install Outside Escutcheon (with Optional Gasket)
Peel off adhesive backing and attach to (outside) escutcheon.
1. Position the outside escutcheon, aligning the posts
with the door prep (Fig. 10).
2. On the inside of the door, position the mounting plate
over the indicated holes.
3. Feed reader cable through opening.
4. The cable from the lockbody feeds from the bottom.
Note: Gasket optional, for non-fire rated doors only.
For non-fire rated door applications, an optional gasket
(Part number 52-0782) may be used as a weather seal
between the escutcheon and the outside door surface.
Note: Cable lengths exaggerated for illustrative purposes.
Fig. 10A
Fig. 10B