INSTALL DOOR CLOSER TO FRAME/MOUNTING PLATE
WITH SPRING ADJUSTMENT NUT AWAY FROM HINGE.
INSTALL MAIN ARM TO SPINDLE AND SECURE WITH SCREW AND WASHER AS SHOWN.
INSERT ROD END INTO MAIN ARM AND TIGHTEN ARM SCREW.
ATTACH FOOT TO DOOR WITH
NUT UP FOR LH, DOWN FOR RH
RIGHT HAND
DOOR SHOWN
NOTE: 351 CLOSER BODIES ARE NON HANDED.
IT IS IMPORTANT THAT THE CLOSER BODY BE
MARKED WITH “RH” SYMBOL AT TOP, FOR LEFT
HAND DOORS. “LH” SYMBOL AT TOP FOR RIGHT
HAND DOORS.
351-A MOUNTING PLATE REQUIRED FOR
DOUBLE RABBETED DOOR.
RIGHT HAND DOOR SHOWN, LEFT
HAND DOOR OPPOSITE.
THIS DIMENSION IS TAKEN FROM HINGE
EDGE OF DOOR FOR INVISIBLE HINGES.
2 1/8" TO 5"
0" TO 2"
REVEAL
DEPTH
ARM
TYPE
140
DOOR
OPENING
140
“HZ” ARM
“H” ARM
5 1/8" TO 8"
140
“HZA” ARM
DRILL & TAP AND USE SCREWS PROVIDED OR USE MORTISE NUTS WHEN
REQUIRED. SEE PAGE 6 FOR MORTISE NUTS.
1
DOOR OPENING TO 180
IS POSSIBLE IF
DEPTH OF REVEAL IS NOT GREATER THAN 2"
3
4
LEFT HAND DOOR
POSITION OF
MAIN ARM WHEN
ASSEMBLING
TO SPINDLE
ROD
ARM
SCREW
HOLD OPEN
ARM
MAIN ARM
90°
INDEX MARK
ON SPINDLE
VIEW LOOKING UP
WHEN ASSEMBLING
ARM TO SPINDLE
RIGHT HAND DOOR
POSITION OF
MAIN ARM WHEN
ASSEMBLING
TO SPINDLE
ROD
ARM
SCREW
HOLD OPEN
ARM
90°
ARMS ARE HANDED AND MUST
BE THE SAME HAND AS DOOR.
1
3
2
4
5
TOP OF DOOR
FRAME
3 3/8"
3 3/8"
DEPTH OF REVEAL
SINGLE RABBETED FRAME
DEPTH OF REVEAL
C OF PLATE
MOUNTING
SCREWS
L
1"
#12 X 1 1/2"
WOOD SCREWS OR
#12-24 X 5/8"
FLAT HEAD
MACHINE SCREW
5 3/8"
1 1/2"
6"
9"
1"
351-A
7/16"
C OF PIVOT HINGE
L
8 7/8"
2 1/2"
NUT FACES DOWN
RIGHT
HAND
DOOR
13/16"
2 1/8"
2 5/16"
2 1/2"
1"
1"
7/16"
1 3/4"
MIN.
D
O
O
R
DOUBLE RABBETED FRAME WITH REQUIRED 351-A MOUNTING PLATE
MOUNTING PLATE
RIGHT HAND
DOOR
NUT FACES UP
LH
3
351 TOP JAMB APPLICATION INSTRUCTIONS
A
B
C
A7341A
Copyright © 2007, 2008, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written permission of
Sargent Manufacturing Company is prohibited.
